Tag Archives: Future Combat Air System (FCAS)

Air, Air Force, Fighters, Unmanned Systems

Combat Air System

On behalf of the governments of France, Germany and Spain, the French General Directorate for Armament (DGA) has awarded to Dassault Aviation, Airbus, Indra, Eumet and their industrial partners the contract for the Demonstrator Phase 1B of the Future Combat Air System (FCAS). This landmark contract, amounting to € 3.2 billion, will cover work on the FCAS demonstrator and its components for about three and a half years.

Future Combat Air System
Europe’s Future Combat Air System

Dassault Aviation, Airbus, Indra and Eumet welcome this major step forward that reflects the determination of France, Germany and Spain to develop a powerful, innovative and fully European weapon system to meet the operational needs of the countries’ armed forces.

This contract notification comes on the heels of the signature of the industrial agreements supporting the demonstrator Phase 1B by Airbus, Dassault Aviation, Indra and Eumet as prime contractors of the programme and by their industrial partners from the three nations. Discussions held over the last months have enabled the creation of a solid basis for cooperation between industry and the three governments.

This continues the successful Phase 1A demonstrators’ related Research and Technology (R&T) work and development activities, which enabled the identification of key technologies and the launch of the demonstrators’ developments. Paving the way for the development phase of the programme, this demonstration phase 1B will allow continuation of flying demonstrators and required cutting-edge technologies development and maturation as well as project architectures consolidation, with in-flight demonstrations targeted in the next phases by 2028-2029.

The programme is made up of a set of systems: New Generation Fighters teaming with Remote Carriers and connected through a Combat Cloud. In order to meet the ambitions and challenges of such a programme, an adapted and efficient industrial organisation has been set-up and built around technological pillars. Each pillar is under the leadership of an industrial champion acting as prime, working in close cooperation with its main partners and leveraging each nation’s aeronautical industrial ecosystems.

In addition to their prime role per pillar, Airbus, Dassault Aviation and Indra act as national coordinators to ensure the overall coherence of the demonstrators and the overall programme’s steering and work consolidation.

FCAS
On the way to the first flight

The industrial governance of the Phase 1B is organised per domain as follows:

  • Next Generation Weapons System (NGWS) Consistency, Demonstrations and Consolidation with Airbus, Dassault Aviation and Indra Sistemas as co-contracting partners;
  • New Generation Fighter (NGF), with Dassault Aviation for France as prime contractor, and Airbus as main partner for Germany and Spain;
  • NGF Engine with the 50/50 Joint Venture Eumet – between Safran Aircraft Engines for France and MTU Aero Engines for Germany – as prime contractor and ITP Aero for Spain as main partner;
  • Unmanned systems, Remote Carrier (RC) with Airbus for Germany as prime contractor, MBDA for France and Satnus for Spain as main partners;
  • Combat Cloud (CC) with Airbus for Germany as prime contractor, Thales for France and Indra Sistemas for Spain as main partners;
  • Simulation with Airbus, Dassault Aviation and Indra Sistemas as co-contracting partners;
  • Sensors with Indra Sistemas as prime for Spain, and Thales for France and FCMS for Germany as main partners;
  • Enhanced Low Observability (stealth) with Airbus as prime contractor for Spain, Dassault Aviation for France and Airbus for Germany as main partners;
  • Common Working Environment with Airbus, Dassault Aviation, Indra Sistemas and Eumet as co-contracting partners.

The industrial partners thank the three nations for their confidence and reiterate their firm commitment and total mobilisation to make this programme the armed wing of Europe’s strategic autonomy thanks to the reinforcement of the operational, technological and industrial sovereignty of its defence.

 

Air, Air Force, Fighters

New Generation Fighter

France and Germany have awarded the first-ever contract – a Joint Concept Study (JCS) – to Dassault Aviation and Airbus for the Future Combat Air System (FCAS) programme. The launch of the JCS was announced by the French Minister of the Armed Forces, Florence Parly, and her German counterpart, Ursula von der Leyen, at a meeting today in Paris.

Airbus and Dassault Aviation sign Joint Concept Study contract for Future Combat Air System
Airbus and Dassault Aviation sign Joint Concept Study contract for Future Combat Air System

The decision by both countries represents a milestone to secure European sovereignty and technological leadership in the military aviation sector for the coming decades. Starting date for the two-year study is 20 February 2019.

Eric Trappier, Chairman and CEO of Dassault Aviation, said: «This new step is the cornerstone to ensure tomorrow’s European strategic autonomy. We, as Dassault Aviation, will mobilize our competencies as System Architect and Integrator, to meet the requirements of the Nations and to keep our continent as a world-class leader in the crucial field of Air Combat Systems».

Dirk Hoke, CEO of Airbus Defence and Space, said: «FCAS is one of the most ambitious European defence programmes of the century. With today’s contract signature, we are finally setting this high-technology programme fully in motion. Both companies are committed to providing the best solutions to our Nations with regard to the New Generation Fighter as well as the systems of systems accompanying it. We are truly excited about having been given this opportunity and appreciate the trust placed in both our companies».

This planned Next Generation Weapons System will consist of a highly capable manned «New Generation Fighter» (NGF) teaming with a set of new and upgraded weapons as well as a set of unmanned systems (Remote Carriers) linked by a Combat Cloud and its Ecosystem embedded in a System-of-Systems FCAS architecture.

The JCS is based on the bi-nationally agreed High Level Common Operational Requirements Document (HLCORD) signed at Berlin Air Show ILA in April 2018 between the Defence Ministers of France and Germany as well as respective national concept studies.

Its aim is to conceptualise the different FCAS capabilities and to pave the way for future design, industrialisation, as well as an estimated full operational capability by 2040. The study will prepare and initiate demonstrator programmes for launch at the Paris Air Show in June 2019.