Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its «blended wing body» scale model technological demonstrator.
At 2 metres/6.56 feet long and 3.2 metres/10.5 feet wide, with a surface area of about 2.25 m²/24.2 square feet, MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up-to 20 percent compared to current single-aisle aircraft. The «blended wing body» configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience.
Launched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020.
«Airbus is leveraging emerging technologies to pioneer the future of flight. By testing disruptive aircraft configurations, Airbus is able to evaluate their potential as viable future products», said Jean-Brice Dumont, EVP Engineering Airbus. «Although there is no specific time line for entry-into-service, this technological demonstrator could be instrumental in bringing about change in commercial aircraft architectures for an environmentally sustainable future for the aviation industry».
Airbus is using its core strengths and capabilities of engineering and manufacturing, in close collaboration with an extended innovation ecosystem, to accelerate traditional research and development cycles. By doing this Airbus is able to achieve proof of concepts, at a convincing scale and speed, thereby driving forward maturity and increasing their value.
Through AirbusUpNext, a research programme, Airbus is currently working on a number of demonstrator projects in parallel; E-FAN X (hybrid-electric propulsion), fello’fly (v-shaped «formation» flight) and ATTOL (Autonomous Taxi Take-Off & Landing).
At the International Fighter Conference in Berlin Airbus and its partners introduced for the first time concrete details of the new Eurofighter Electronic Combat Role (ECR) concept. This role will enlarge Eurofighter’s multi-role capabilities and further increase the survivability of coalition forces in hostile environments.
Collaborative electronic warfare capabilities are essential for future combined air operations.
Initial Eurofighter ECR capability is expected to be available by 2026, followed by further development steps and full integration into the Future Combat Air System (FCAS) ecosystems.
Eurofighter ECR will be able to provide passive emitter location as well as active jamming of threats, and will offer a variety of modular configurations for Electronic Attack (EA) and Suppression/Destruction of Enemy Air Defence (SEAD/DEAD). Latest national escort jammer technology will ensure national control over features such as mission data and data analysis. The concept also features a new twin-seat cockpit configuration with a multi-function panoramic touch display and a dedicated mission cockpit for the rear-seat.
The concept is driven by the leading aerospace companies Airbus, Hensoldt, MBDA, MTU, Premium Aerotec, Rolls-Royce and supported by the German national industry bodies BDSV and BDLI. It specifically targets the German Air Force requirements for an airborne electronic attack capability. Furthermore, it is the single opportunity to deliver such capabilities on the basis of national sovereignty, whilst also securing key military technologies within Germany.
Eurofighter is the backbone of German air defence. With more than 600 aircraft under contract and a workforce of 100.000 it is the largest collaborative defence programme in Europe to date.
The NH90 NATO Frigate Helicopter will be the successor of the Sea Lynx Mk 88A as the helicopter of the German Navy. This ensures a smooth transition and synergies in later operations.
The Federal Ministry of Defense has prepared this decision since the end of 2018 with the support of the Federal Office for Equipment, Information Technology and the Use of the Bundeswehr (BAAINBw). The representative of the Inspector General of the German Armed Forces, Vice Admiral Joachim Rühle, approved this proposal on 29 July.
The Navy is expected to receive from 2025 their new on-board helicopter. Its special designation is «Multi-Role Frigate Helicopter» (MRFH). It will be the German version of the NH90 NATO Frigate Helicopter (NH90 NFH), and closest to the French variant NFH (NFRS) Caiman.
The NFH already flies for the Italian, Norwegian, Belgian and Dutch naval forces.
As the next important milestone in the MRFH procurement process, the Bundestag will deal with a corresponding bill in 2020.
On-board helicopters are an integral part of the «frigate system». Equipped with sonar, radar and torpedoes, they are the essential sensor and weapons carriers in naval warfare, below as well as above water. They can also flexibly support maritime operations through transport and rescue missions.
Overall dimensions (rotors turning)
64.18 feet/19.56 m
53.48 feet/16.30 m
17.42 feet/5.31 m
Maximum Gross Weight
23,369 lbs/10,600 kg
Alternate Gross Weight
24,250 lbs/11,000 kg
14,109 lbs/6,400 kg
9,260 lbs/4,200 kg
8,818 lbs/4,000 kg
Single or dual Rescue Hoist
595 lbs/270 kg
Rescue Hoist on ground
880 lbs/400 kg
7-Cell Internal System
4,486 lbs/2,035 kg
Internal Auxiliary Fuel Tanks (each)
882 lbs/400 kg
External Auxiliary Fuel Tanks (each)
644 lbs/292 kg or 1,102 lbs/500 kg
6.56 feet/2.00 m
15.75 feet/4.80 m
5.18 feet/1.58 m
536.78 feet³/15.20 m³
Sliding doors opening
5.25 × 4.92 feet/1.60 × 1.50 m
Rear ramp opening
5.84 × 5.18 feet/1.78 × 1.58 m
NH90 General Performance (Basic Aircraft)
Maximum Cruise Speed*
162 knots/186 mph/300 km/h
Economical Cruise Speed*
140 knots/161 mph/260 km/h
Maximum Rate Of Climb*
2,200 feet/min/11.2 m/sec
One Engine Inoperative (OEI) Rate Of Climb 2 min Rating*
850 feet/min/4.3 m/sec
OEI Rate Of Climb Continuous Rating at 6,560 feet/2,000 m*
The first Airbus C295, purchased by the Government of Canada for the Royal Canadian Air Force’s (RCAF) Fixed Wing Search and Rescue Aircraft Replacement (FWSAR) program, has completed its maiden flight, marking a key milestone towards delivery by the end of 2019 to begin operational testing by the RCAF. The aircraft, designated CC-295 for the Canadian customer, took off from Seville, Spain, on 4 July at 20:20 local time (GMT+1) and landed back on site one hour and 27 minutes later.
FWSAR program facts and figures
The contract, awarded in December 2016, includes 16 C295 aircraft and all In-Service Support elements including, training and engineering services, the construction of a new Training Centre in Comox, British Columbia, and maintenance and support services.
The aircraft will be based where search and rescue squadrons are currently located: Comox, British Columbia; Winnipeg, Manitoba; Trenton, Ontario; and Greenwood, Nova Scotia.
Considerable progress has been made since the FWSAR program was announced two and a half years ago: the first aircraft will now begin flight testing; another five aircraft are in various stages of assembly; and seven simulator and training devices are in various testing stages.
In addition, the first RCAF crews will begin training in late summer 2019 at Airbus’ International Training Centre in Seville, Spain.
The FWSAR program is supporting some $2.5 billion (CAD) in Industrial and Technological Benefits (ITB) to Canada, through high-value, long-term partnerships with Canadian industry.
As of January 2019, 86 percent of key Canadian In-Service Support (ISS) tasks have been performed in-country by Canadian companies in relation to establishing the FWSAR ISS system. Airbus is thus on track in providing high value work to Canadian industry and has demonstrated a successful start to the development and transfer of capability to Canadian enterprises for the support of the FWSAR aircraft.
Beyond direct program participation, Airbus is generating indirect business across Canadian military, aeronautical and space industry including Small and Medium Businesses in support of the ITB program.
On 2 July 2019, the Directorate General of Armament (DGA) received the second A330-MRTT Phénix multi-role tanker aircraft (MultiRole Tanker Transport) at Air Base 125 in Istres. This aircraft was delivered to the Air Force three months early and with a first MedEvac (Medical Evacuation) capability, so as to reach full operational capability in the fall.
It will allow medicalized transport of a dozen very seriously injured patients, or the medical transport of 40 lightly-injured patients requiring less medical assistance.
The MRTT Phénix is based on the airframe of the Airbus A330 airliner, militarized to allow it to meet its specific mission requirements: support of the air component of the nuclear deterrent; contribution to the permanent security posture; projection of forces and medicalized transport in case of emergency medical evacuation.
Thanks to its versatility, the MRTT Phoenix replaces two distinct fleets for this entire range of missions: the current in-flight refueling fleet of C135-FR and KC135R, and the strategic personnel and freight transport fleet of A310 and A340.
The military programming law 2019-2025 provides for the acceleration of the modernization of the equipment of the forces, and in particular of the tanker aircraft fleet. It will bring forward to 2023, two years earlier than planned, the delivery of the first twelve aircraft, and creating the conditions allowing a subsequent increase of the fleet to fifteen aircraft in following years.
Florence Parly, Minister of the Armed Forces, welcomes this early delivery: «The Phoenix is an essential aircraft for the French forces, and for and our deterrence. It will replace aircraft, some of which are 60 years old, and represents a real revolution for the Air Force. Its versatility makes it a technological marvel, and it is an undeniable industrial success and an example of what a great European company – Airbus – knows how to build».
Airbus has successfully completed a flight demonstration of a connected airborne battlespace scenario, centred on a Multi Role Tanker Transport (MRTT) aircraft. The test was carried out as part of the development of Airbus’ Network for the Sky (NFTS) programme. This follows on from last August’s demonstration in Canada of secure mobile communications using a stratospheric balloon to simulate a High Altitude Pseudo Satellite (HAPS), such as Airbus’ Zephyr Unmanned Aerial Vehicle (UAV).
NFTS combines various technologies – satellite and ground communications, air-to-ground, ground-to-air and air-to-air tactical links, 5G mobile communications and laser connections – in a resilient, unified, secure, highly interoperable, mesh network. Aircraft, UAVs and helicopters currently use networks with limited bandwidth and interoperability, and often little resilience. NFTS will allow them to form an integral part of high-speed military networks.
«This unique demonstration is a significant milestone in realising our vision of secure connectivity, which will enable the future air combat cloud and enhance real time execution of military missions», said Evert Dudok, Head of Communications, Intelligence & Security at Airbus Defence and Space.
The demonstration scenario simulates the establishment of multi-Mbit/s, wideband communication links between ground forces operatives, a fighter jet, a MRTT, and a Combined Air Operations Centre (CAOC) on the ground. Both the operatives and jet fighter had to send video in real time to provide enhanced real-time situational awareness and receive instructions from the CAOC in return.
The operative located in Getafe (Spain) was equipped with a standard handheld radio for NATO forces (ROVER). The fighter was deployed to obtain imagery of the area of interest and act as a communications node between the operative and the MRTT flying at 30,000 feet/9,144 m within a 150 km/93 miles radius in secure airspace. Communications were thus relayed between the fighter jet and the MRTT, via a wideband Line-Of-Sight (LOS) data link. The MRTT then routed the video along with its own communications via a wideband satellite link to a space teleport near Washington, D.C. The communications flow was then returned to Europe via a terrestrial link to the CAOC.
This complex scenario demonstrates the real-time operation of secure end-to-end communications across different networks and technologies: ground-air tactical link, air-air wideband link between two aircrafts, air-satellite relay and terrestrial networks. This type of configuration, known as a «hybrid network», represents the future of military communications and meets the needs of armed forces to be able to use a wide range of networks while allowing these to be managed dynamically and transparently. The solutions developed by Airbus thus allow secure Internet Protocol (IP) communications to be established, links to be reconfigured in real time and the available bandwidth to be allocated to data links based on operational priorities.
For this demonstration an MRTT aircraft has been equipped with Janus, Airbus’ new tri-band (Ku-Ka-MilKa) satellite antenna, as well as the latest version of the Proteus satellite modem, which is highly resilient against interference and jamming, and Airbus’ Aircraft Links Integration Management System (ALIMS).
This exercise paves the way for the development of the core capability for SMART MRTT connectivity, which will allow the MRTT to act as a high-end communication node. Network for the Sky (NFTS) sets the foundation for the connected airborne battlespace, with the objective to offer a full operational capability by 2020. The NFTS programme is part of Airbus’ Future Air Power project and is fully aligned with the development of the European Future Combat Air System (FCAS).
France and Germany have awarded the first-ever contract – a Joint Concept Study (JCS) – to Dassault Aviation and Airbus for the Future Combat Air System (FCAS) programme. The launch of the JCS was announced by the French Minister of the Armed Forces, Florence Parly, and her German counterpart, Ursula von der Leyen, at a meeting today in Paris.
The decision by both countries represents a milestone to secure European sovereignty and technological leadership in the military aviation sector for the coming decades. Starting date for the two-year study is 20 February 2019.
Eric Trappier, Chairman and CEO of Dassault Aviation, said: «This new step is the cornerstone to ensure tomorrow’s European strategic autonomy. We, as Dassault Aviation, will mobilize our competencies as System Architect and Integrator, to meet the requirements of the Nations and to keep our continent as a world-class leader in the crucial field of Air Combat Systems».
Dirk Hoke, CEO of Airbus Defence and Space, said: «FCAS is one of the most ambitious European defence programmes of the century. With today’s contract signature, we are finally setting this high-technology programme fully in motion. Both companies are committed to providing the best solutions to our Nations with regard to the New Generation Fighter as well as the systems of systems accompanying it. We are truly excited about having been given this opportunity and appreciate the trust placed in both our companies».
This planned Next Generation Weapons System will consist of a highly capable manned «New Generation Fighter» (NGF) teaming with a set of new and upgraded weapons as well as a set of unmanned systems (Remote Carriers) linked by a Combat Cloud and its Ecosystem embedded in a System-of-Systems FCAS architecture.
The JCS is based on the bi-nationally agreed High Level Common Operational Requirements Document (HLCORD) signed at Berlin Air Show ILA in April 2018 between the Defence Ministers of France and Germany as well as respective national concept studies.
Its aim is to conceptualise the different FCAS capabilities and to pave the way for future design, industrialisation, as well as an estimated full operational capability by 2040. The study will prepare and initiate demonstrator programmes for launch at the Paris Air Show in June 2019.
The Hungarian Ministry of Defence has ordered 16 H225M multi-purpose helicopters equipped with the HForce weapon management system. Together with the helicopters, Airbus will also provide an extensive training and support package to ensure the highest level of operational availability.
«I am thankful for the trust that the Hungarian Government has placed in our company to support its ambitious ‘Zrinyi 2026’ armed forces modernisation programme. Our teams have witnessed the professionalism and enthusiasm of the Hungarian experts and pilots whose contribution has been key to ensuring the success of this project», said Bruno Even, Airbus Helicopters CEO. «This new contract confirms the H225M as a combat-proven, multi-role platform operated by the most demanding military customers worldwide. The Hungarian armed forces will be able to rely on the cost-efficient H145M/H225M tandem that will enable them to cover all of the major military missions, from light utility, tactical transport, combat search and rescue up to light attack».
The H225Ms selected by Hungary will be equipped with state-of-the-art communication capabilities and will be used for transport, combat search and rescue, and special operations missions. Its state-of-the art avionics and four axis autopilot, exceptional range and payload capacities, combined with a large cabin designed to carry up to 28 troops and powerful air-to-ground and air-to-surface armament as well as electronic warfare systems allow the H225M to carry out the most demanding missions. The helicopter has an all-weather capability supported by its night vision goggle compatibility.
The H225M is currently in service across the globe with 88 helicopters having been delivered so far. It recently surpassed the 100,000 flight hour milestone, following its first delivery to the French Air Force in 2006. Since then the 11-metric-tonne H225M has proven its reliability and durability in multiple combat environments and crisis areas.
With this contract, Hungary becomes the 9th country to have selected the H225M. A member of the multi-role Super Puma family of helicopters, this military variant is currently operational in France, Brazil, Mexico, Malaysia, Indonesia and Thailand, and has recently been ordered by Kuwait and Singapore.
2 pilots + 1 chief of stick + 28 seats
2 pilots + 8 to 12 passengers
2 pilots + up to 11 stretchers + 4 seats
4,750 kg/10,472 lbs.
16.79 m/55.08 feet
3.96 m/13 feet
4.60 m/15.09 feet
Maximum Take-Off Weight (MTOW)
11,000 kg/24,251 lbs.
MTOW in external load configuration
11,200 kg/24,690 lbs.
5,715 kg/12,600 lbs.
5,285 kg/11,651 lbs.
Maximum cargo-sling load
4,750 kg/10,472 lbs.
Standard fuel capacity
2,247 kg/4,954 lbs.
ENGINES 2 TURBOMECA MAKILA 2A1
Take-off power per engine
1,567 kW/2,101 shp
PERFORMANCE AT MAXIMUM GROSS WEIGHT, ISA*, SL**
Maximum speed (Vne***)
324 km/h/175 knots
Fast cruise speed (at MCP****)
262 km/h/142 knots
Rate of climb
5.4 m/s/1,064 feet/min
Service ceiling (Vz = 0.508 m/s = 100 feet/min)
3,968 m/13,019 feet
Hover ceiling OGE***** at ISA*, MTOW, take-off power
792 m/2,600 feet
Maximum range without reserve at Economical Cruise Speed
Fifty-five years after the arrival of the first Boeing C135 tanker aircraft, the A330 Phoenix on Friday, October 12, took off from Istres air base on its first flight after having officially joined the Air Force.
Piloted by a crew of the MRTT team of the Military Aviation Expertise Center (CEAM), the new tanker aircraft made a first flight of flight refueling trial with the aircraft of the 2/2 «Côte-d’Or» Calibration Squadron.
This first flight marks the beginning of the experimental and test campaign that will allow the aircraft to be reach Initial Operational Capability (IOC) within a year. Integrated into the 31st EARTS (strategic air refueling squadron), the trial team will perform many test flights to qualify the aircraft for all the missions it will carry out. The first phase will be dedicated to the air refueling missions of the various Air Force aircraft and those of our allies, in multiple configurations, by day or night and in all weathers.
Once the refueling capabilities are validated, the aircraft’s trials will be expanded to include strategic cargo and personnel transport and medical evacuation. The Phénix, so named by the Air Force as a symbol of the aircraft capable of «reborning» any aircraft it refuels in flight, will ultimately replace the Air Force’s entire fleet of strategic aircraft (C135, A310 and A340) which are now used for long-range missions.
Operated by the strategic air forces, the fleet of 12 aircraft (15 after 2025) will be stationed at the 125 Istres air base, whose role as our «logistics hub» will be increased tenfold.
Given that the A330 Phoenix is one and a half times larger than the C135, the entire infrastructure of Air Base 125 has had to be reviewed. A first maintenance hangar, a parking lot and new air traffic routes were thus created at the air base for the reception and implementation of the aircraft.
This site, the largest currently in terms of investments for the Ministry of the Armed Forces, will continue to accommodate 12 aircraft by 2023. In addition to two other maintenance hangars, Istres will have a new terminal for personnel and logistics transport missions which are currently carried out by the 1/60 «Estérel» transport squadron from Roissy Charles-de-Gaulle airport.
The first Airbus A330 Phénix Multi-Role Tanker Transport Aircraft (MRTT) arrived Thursday afternoon (on September 27) at Istres air base, in south-eastern France. Its reception operations, managed by the Directorate General of Armaments (DGA), will be completed, allowing its hand-over to the Air Force.
Armed Forces Minister Florence Parly will travel to Istres on October 19 for the official ceremony marking the arrival of the first Phoenix MRTT in the Air Force, together with General Lavigne, Chief of Staff of the French Air Force.
By its versatility, the A330 Phénix will replace two types of aircraft in the air force’s fleet: the C135 and KC135 tanker aircraft, some of which will be nearly 60 years old by the time they are retired, and the A310 and A340 strategic transport aircraft, used for both personnel and freight. Twelve Phénix aircraft will be delivered to the Air Force by 2023, out of a planned total of 15, as specified by the 2019-2025 Military Programming Law, and the minister’s wish to accelerate their delivery.
Its missions will include supporting the air component of the nuclear deterrent, the contribution to France’s permanent security posture, the projection of forces and power as well as the medical evacuation in case of emergencies or natural catastrophes.
The MRTT Phoenix is based on an Airbus A330 commercial aircraft, modified to meet specific military requirements, principally mid-air refueling. This type of aircraft is already in service with several of our allies.
This first MRTT Phénix aircraft is due to enter operational service with the strategic air force command in 2019, after a technical and operational evaluation campaign carried out by the Air Force and intended to develop the procedures for use its operational employment, doctrine and procedures.
In addition, on September 27th, the second MRTT Phénix aircraft, scheduled to be delivered in 2019, made its first test flight out of the Airbus plant in Getafe (Spain), following its conversion into a military plane.